MultiTEKä Slim Servo Motor Controllers
Sherline
and
50W brushless servo motors with encoders for CNC ready Sherline lathes and
milling machines.
Features
Ø
MultiTEK™ Slim Servo controller is compatible with Mach3 for Windows® and EMC with
Linux.
Ø
No more missed steps. Over current or positional error dropout –
machine will automatically stop,
minimizing
damage to machine and work piece
Ø
High accuracy! Cannot lose position! Whisper quiet
motion!
Servo Motors
NEMA #23 frame servo motors are
fitted with encoders and have ¼” double ended shafts to fit Sherline hand
wheels.
Price List
|
PART NO. |
PRODUCT NAME AND USE |
WT KG |
AU$ PRICE EX GST |
AU$ PRICE INC 10% GST |
|
68763 |
CNC 3-AXIS MultiTEK Slim Servo
Controller with Power supply. Includes parallel cable for attachment to computer's
printer port. |
7.0 |
1,370.00 |
1,507.00 |
|
68764 |
CNC 4-AXIS MultiTEK Slim Servo
Controller with Power supply. Includes parallel cable for attachment to computer's printer
port. |
7.1 |
1,550.00 |
1,705.00 |
|
68765 |
68763 Servo Controller plus 2
servo motors with 1 metre long cables. Upgrade any
Sherline CNC-ready lathe to CNC with this kit. Computer and software not
included. |
8.0 |
1,756.00 |
1,931.60 |
|
68770 |
68764 Servo Controller plus 3
servo motors with 1 metre long cables. Upgrade any
Sherline CNC-ready mill to CNC with this kit. Computer and software not
included. |
8.6 |
2,129.00 |
2,337.50 |
|
68771 |
Servo Motor – 50W – brushless. Includes encoder |
0.5 |
165.00 |
181.50 |
|
68772 |
Servo Motor cable –1 metre
fitted. Add AU$11.00 per extra
metre |
0.1 |
28.00 |
30.80 |
|
68773 |
USB CNC Interface for faster data transfer |
1.0 |
350.00 |
385.00 |
|
Mach3 |
Mach3 software CD & Licence |
- |
270.00 |
297.00 |
P/No 68770 MultiTEK™ Slim 8A Parallel
Interface
Servo Motor Controller with 3 Motors
This is the full plug-in solution
Specifications
|
Parameter |
MultiTEK™
Slim |
|
Drive
Specification |
|
|
Drive
Voltage (Maximum) |
28V |
|
Drive
Voltage (Minimum) |
12V |
|
Drive
Voltage Ripple |
<2%
See Note 1 |
|
Drive
Current (Peak) [Software Limited] |
30A |
|
Drive
Current (Continuous) |
8A |
|
Drive
Current Trip Value |
30A |
|
|
|
|
Servo
Motor Resi |
1 ohm |
|
Servo
Motor Inductance (Minimum) |
1mH |
|
PWM
Switch Frequency |
25Khz |
|
|
|
|
Logic
Specification |
|
|
5V
Logic Supply |
5V @ 85mA |
|
24V
Driver Supply |
24V @ 8A |
|
Logic
Level |
3.3V –
5V TTL |
|
Encoder
Quadrature TTL Channels |
2 |
|
Encoder
Current (Maximum) |
200mA |
|
Encoder
Pulse Frequency (Maximum) |
2 MHz |
|
Encoder
following error trip |
+/- 10
to +/- 2000 selectable |
|
Encoder
Voltage |
5V +/-
10% 0.25A Maximum current draw |
|
|
|
|
Physical
Specification |
|
|
Dimensions |
3
Axis L=350mm x
W=100mm x H=20mm |
|
4 Axis
L=410mm x W=100mm x H=20mm |
|
|
Weight |
3
Axis
1.0kg |
|
4
Axis 1.1kg |
|
|
Motor
/ Power Terminals |
Plug
Header 10A |
|
Hall
Sensor |
6 way
Header 0.1” |
|
Encoder
Connector |
RJ45 |
|
Operating
|
0 ~
55ºC RH 90% non condensing |
|
|
-30 ~
85ºC RH 90% non condensing |
This interface is designed specifically
for Mach3 CNC control. With parallel ports becoming harder to find, and the
old step/direction speeds running a little to slow for modern High
resolution Servo motors, this unit plugs into a spare USB port and gives
you the equivalent of 2* LPT ports dedicated to your CNC and with speeds of
up to 4 Million Steps/second!
Part No 68773 USB CNC Interface
Features:
Ø
Up to 4 Million Steps/sec
Ø
Includes 2 LPT ports
Ø
All pins on both ports configurable
within Mach3
Ø
No power supply required.
Ø
Powered by the USB, no extra power
supplies are required.
Ø
USB cable and software drivers are
supplied.
